- Details
- Reviews
- Tags
- FAQ
Virus killing COVID-19 Novel coronavirus pneumonia portable UV light stick small household hand-held UV mobile disinfector for removing mites
1: Instructions (power supply: adapter)
1.1: connect the power adapter and the socket.
1.2: product startup: press and hold the time setting button for 3 seconds, the LCD is activated, and the initial display time is 10 seconds.
1.3: time adjustment: release the time setting button after startup. Each time you press the time setting button, the time changes in order: 10 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 30 minutes.
1.4: product work: when you have finished setting the time, press the operation key to start the work, and then press the key to stop the work.
1.5: when the product is working, please turn down the UV lamp and do not look at it directly.
1.6: point the UV lamp at the area to be disinfected and parallel it.
1.7: do not contact the UV lamp directly with the object. It is better to keep a distance of 3-5cm in parallel!
1.8: product close: press and hold the operation key for 3 seconds, then the product is closed
1.9: when the set time is exceeded, the product will automatically close. If you want to open it, please operate again according to the above procedure.
New with smart sensing:
Operation of hand-held disinfectant stick: first plug in the power supply alone - plug in the power supply - press and hold the first time setting key above and wait for 0:10 - then press the second key below to select the time (the time changes in sequence: 10 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 30 minutes) The first key is to open after selecting the time. When using, the horizontal scanning disinfection has the function of intelligent induction. If it is safe to prevent ultraviolet rays from shining on people, the vertical side is not on, and the horizontal ultraviolet light is on
2: Instructions for use (power supply: battery)
2.1: push back the battery cover (as shown in the figure), insert 4 No. 5 batteries, and pay attention to the + / - pole.
2.2: after the battery is installed, please push on the cover. Before use, please make sure that the cover is closed.
2.3: product startup: press and hold the time setting button for 3 seconds, the LCD is activated, and the initial display time is 10 seconds.
2.4: time adjustment: release the time setting button after startup. Each time you press the time setting button, the time changes in order: 10 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 30 minutes.
2.5: product work: when you have finished setting the time, press the operation key to start the work, and then press the key to stop the work.
2.6: when the product is working, please turn down the UV lamp and do not look at it directly.
2.7: point the UV lamp at the area to be disinfected and parallel it.
2.8: do not contact the UV lamp directly with the object, it is better to keep a distance of 3-5cm in parallel.
2.9: product close: press and hold the operation key for 3 seconds, then the product is closed.
2.10: when the set time exceeds, the product will automatically close. If you want to open it, please operate again according to the above procedure.
Power supply: the product can use battery (not included in the product accessories) or DC adapter (included in the product accessories). Only one of the two can be used at the same time!